dmesg - memory speed test
Linux version 5.4.0-7634-generic (buildd@lgw01-amd64-017) (gcc version 9.3.0 (Ubuntu 9.3.0-10ubuntu2)) #38~1592497129~20.04~9a1ea2e-Ubuntu SMP Fri Jun 19 22:43:37 UTC (Ubuntu 5.4.0-7634.38~1592497129~20.04~9a1ea2e-generic 5.4.41)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Hygon HygonGenuine
Centaur CentaurHauls
zhaoxin Shanghai
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000009d01fff] usable
BIOS-e820: [mem 0x0000000009d02000-0x0000000009ffffff] reserved
BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable
BIOS-e820: [mem 0x000000000a200000-0x000000000a20bfff] ACPI NVS
BIOS-e820: [mem 0x000000000a20c000-0x000000000affffff] usable
BIOS-e820: [mem 0x000000000b000000-0x000000000b01ffff] reserved
BIOS-e820: [mem 0x000000000b020000-0x00000000db136fff] usable
BIOS-e820: [mem 0x00000000db137000-0x00000000dc628fff] reserved
BIOS-e820: [mem 0x00000000dc629000-0x00000000dc7a8fff] usable
BIOS-e820: [mem 0x00000000dc7a9000-0x00000000dcbb6fff] ACPI NVS
BIOS-e820: [mem 0x00000000dcbb7000-0x00000000dd73bfff] reserved
BIOS-e820: [mem 0x00000000dd73c000-0x00000000deffffff] usable
BIOS-e820: [mem 0x00000000df000000-0x00000000dfffffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fd000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000041f37ffff] usable
NX (Execute Disable) protection: active
SMBIOS 3.2.1 present.
DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./B450 Gaming-ITX/ac, BIOS P3.70 11/18/2019
tsc: Fast TSC calibration using PIT
tsc: Detected 3792.919 MHz processor
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x41f380 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-through
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000C0000000 mask FFFFE0000000 write-back
3 base 0000DCE80000 mask FFFFFFFF0000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 0000000420000000 aka 16896M
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
total RAM covered: 3583M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 64M num_reg: 4 lose cover RAM: 0G
e820: update [mem 0xdce80000-0xdce8ffff] usable ==> reserved
e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
last_pfn = 0xdf000 max_arch_pfn = 0x400000000
check: Scanning 1 areas for low memory corruption
Using GB pages for direct mapping
BRK [0x26e401000, 0x26e401fff] PGTABLE
BRK [0x26e402000, 0x26e402fff] PGTABLE
BRK [0x26e403000, 0x26e403fff] PGTABLE
BRK [0x26e404000, 0x26e404fff] PGTABLE
BRK [0x26e405000, 0x26e405fff] PGTABLE
BRK [0x26e406000, 0x26e406fff] PGTABLE
BRK [0x26e407000, 0x26e407fff] PGTABLE
BRK [0x26e408000, 0x26e408fff] PGTABLE
BRK [0x26e409000, 0x26e409fff] PGTABLE
BRK [0x26e40a000, 0x26e40afff] PGTABLE
BRK [0x26e40b000, 0x26e40bfff] PGTABLE
BRK [0x26e40c000, 0x26e40cfff] PGTABLE
RAMDISK: [mem 0x2dca5000-0x32e49fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F05A0 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000DCB340A0 0000BC (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x00000000DCB3AE70 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x00000000DCB341F0 006C7A (v02 ALASKA A M I 01072009 INTL 20120913)
ACPI: FACS 0x00000000DCBA0E00 000040
ACPI: APIC 0x00000000DCB3AF88 00015E (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x00000000DCB3B0E8 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FIDT 0x00000000DCB3B130 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 0x00000000DCB3B1D0 000094 (v02 ALASKA CPUSSDT 01072009 AMI 01072009)
ACPI: SSDT 0x00000000DCB3B268 008C98 (v02 AMD AMD ALIB 00000002 MSFT 04000000)
ACPI: SSDT 0x00000000DCB43F00 00315B (v01 AMD AMD AOD 00000001 INTL 20120913)
ACPI: MCFG 0x00000000DCB47060 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
ACPI: AAFT 0x00000000DCB470A0 000447 (v01 ALASKA OEMAAFT 01072009 MSFT 00000097)
ACPI: HPET 0x00000000DCB474E8 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
ACPI: UEFI 0x00000000DCB47520 000042 (v01 ALASKA A M I 00000002 01000013)
ACPI: PCCT 0x00000000DCB47568 00006E (v01 AMD AMD PCCT 00000001 AMD 00000000)
ACPI: SSDT 0x00000000DCB475D8 001F89 (v01 AMD AMD CPU 00000001 AMD 00000001)
ACPI: CRAT 0x00000000DCB49568 000798 (v01 AMD AMD CRAT 00000001 AMD 00000001)
ACPI: CDIT 0x00000000DCB49D00 000029 (v01 AMD AMD CDIT 00000001 AMD 00000001)
ACPI: SSDT 0x00000000DCB49D30 001D34 (v01 AMD AmdTable 00000001 INTL 20120913)
ACPI: SSDT 0x00000000DCB4BA68 0000BF (v01 AMD AMD PT 00001000 INTL 20120913)
ACPI: SSDT 0x00000000DCB4BB28 0010AF (v01 AMD AmdTable 00000001 INTL 20120913)
ACPI: WSMT 0x00000000DCB4CBD8 000028 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000041f37ffff]
NODE_DATA(0) allocated [mem 0x41f355000-0x41f37ffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000041f37ffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009dfff]
node 0: [mem 0x0000000000100000-0x0000000009d01fff]
node 0: [mem 0x000000000a000000-0x000000000a1fffff]
node 0: [mem 0x000000000a20c000-0x000000000affffff]
node 0: [mem 0x000000000b020000-0x00000000db136fff]
node 0: [mem 0x00000000dc629000-0x00000000dc7a8fff]
node 0: [mem 0x00000000dd73c000-0x00000000deffffff]
node 0: [mem 0x0000000100000000-0x000000041f37ffff]
Zeroed struct page in unavailable ranges: 17554 pages
Initmem setup node 0 [mem 0x0000000000001000-0x000000041f37ffff]
On node 0 totalpages: 4176750
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 14050 pages used for memmap
DMA32 zone: 899153 pages, LIFO batch:63
Normal zone: 51150 pages used for memmap
Normal zone: 3273600 pages, LIFO batch:63
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 10, version 33, address 0xfec01000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228201 base: 0xfed00000
smpboot: Allowing 32 CPUs, 24 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x09d02000-0x09ffffff]
PM: Registered nosave memory: [mem 0x0a200000-0x0a20bfff]
PM: Registered nosave memory: [mem 0x0b000000-0x0b01ffff]
PM: Registered nosave memory: [mem 0xdb137000-0xdc628fff]
PM: Registered nosave memory: [mem 0xdc7a9000-0xdcbb6fff]
PM: Registered nosave memory: [mem 0xdcbb7000-0xdd73bfff]
PM: Registered nosave memory: [mem 0xdf000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfcffffff]
PM: Registered nosave memory: [mem 0xfd000000-0xffffffff]
[mem 0xe0000000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:32 nr_cpu_ids:32 nr_node_ids:1
percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u262144
pcpu-alloc: s184320 r8192 d28672 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [0] 24 25 26 27 28 29 30 31
Built 1 zonelists, mobility grouping on. Total pages: 4111465
Policy zone: Normal
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
mem auto-init: stack:off, heap alloc:on, heap free:off
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16230692K/16707000K available (14339K kernel code, 2397K rwdata, 4952K rodata, 2712K init, 4992K bss, 476308K reserved, 0K cma-reserved)
random: get_random_u64 called from kmem_cache_open+0x2d/0x410 with crng_init=0
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=1
ftrace: allocating 44480 entries in 174 pages
rcu: Hierarchical RCU implementation.
rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=32.
Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=32
NR_IRQS: 524544, nr_irqs: 1224, preallocated irqs: 16
random: crng done (trusting CPU's manufacturer)
spurious 8259A interrupt: IRQ7.
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
printk: console [tty0] enabled
ACPI: Core revision 20190816
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
APIC: Switch to symmetric I/O mode setup
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x6d586d4df65, max_idle_ns: 881590807747 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 7585.83 BogoMIPS (lpj=15171676)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
Yama: becoming mindful.
AppArmor: AppArmor initialized
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
*** VALIDATE tmpfs ***
*** VALIDATE proc ***
*** VALIDATE cgroup1 ***
*** VALIDATE cgroup2 ***
x86/cpu: User Mode Instruction Prevention (UMIP) activated
LVT offset 1 assigned for vector 0xf9
LVT offset 2 assigned for vector 0xf4
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 2048, 2MB 2048, 4MB 1024, 1GB 0
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Full AMD retpoline
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
Freeing SMP alternatives memory: 40K
smpboot: CPU0: AMD Ryzen 3 3300X 4-Core Processor (family: 0x17, model: 0x71, stepping: 0x0)
Performance Events: Fam17h+ core perfctr, AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
rcu: Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
smp: Brought up 1 node, 8 CPUs
smpboot: Max logical packages: 4
smpboot: Total of 8 processors activated (60686.70 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0x0a200000-0x0a20bfff] (49152 bytes)
PM: Registering ACPI NVS region [mem 0xdc7a9000-0xdcbb6fff] (4251648 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 8192 (order: 7, 524288 bytes, linear)
pinctrl core: initialized pinctrl subsystem
PM: RTC time: 14:06:59, date: 2020-07-08
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1594217219.148:1): state=initialized audit_enabled=0 res=1
EISA bus registered
cpuidle: using governor ladder
cpuidle: using governor menu
Detected 1 PCC Subspaces
Registering PCC driver as Mailbox controller
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: 8 ACPI AML tables successfully acquired and loaded
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 2 GPEs in block 00 to 1F
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfec2ffff window]
pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [1022:1480] type 00 class 0x060000
pci 0000:00:01.0: [1022:1482] type 00 class 0x060000
pci 0000:00:01.1: [1022:1483] type 01 class 0x060400
pci 0000:00:01.1: enabling Extended Tags
pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
pci 0000:00:01.3: [1022:1483] type 01 class 0x060400
pci 0000:00:01.3: enabling Extended Tags
pci 0000:00:01.3: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [1022:1482] type 00 class 0x060000
pci 0000:00:03.0: [1022:1482] type 00 class 0x060000
pci 0000:00:03.1: [1022:1483] type 01 class 0x060400
pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: [1022:1482] type 00 class 0x060000
pci 0000:00:05.0: [1022:1482] type 00 class 0x060000
pci 0000:00:07.0: [1022:1482] type 00 class 0x060000
pci 0000:00:07.1: [1022:1484] type 01 class 0x060400
pci 0000:00:07.1: enabling Extended Tags
pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
pci 0000:00:08.0: [1022:1482] type 00 class 0x060000
pci 0000:00:08.1: [1022:1484] type 01 class 0x060400
pci 0000:00:08.1: enabling Extended Tags
pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
pci 0000:00:08.2: [1022:1484] type 01 class 0x060400
pci 0000:00:08.2: enabling Extended Tags
pci 0000:00:08.2: PME# supported from D0 D3hot D3cold
pci 0000:00:08.3: [1022:1484] type 01 class 0x060400
pci 0000:00:08.3: enabling Extended Tags
pci 0000:00:08.3: PME# supported from D0 D3hot D3cold
pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
pci 0000:00:18.0: [1022:1440] type 00 class 0x060000
pci 0000:00:18.1: [1022:1441] type 00 class 0x060000
pci 0000:00:18.2: [1022:1442] type 00 class 0x060000
pci 0000:00:18.3: [1022:1443] type 00 class 0x060000
pci 0000:00:18.4: [1022:1444] type 00 class 0x060000
pci 0000:00:18.5: [1022:1445] type 00 class 0x060000
pci 0000:00:18.6: [1022:1446] type 00 class 0x060000
pci 0000:00:18.7: [1022:1447] type 00 class 0x060000
pci 0000:01:00.0: [126f:2262] type 00 class 0x010802
pci 0000:01:00.0: reg 0x10: [mem 0xf7a00000-0xf7a03fff 64bit]
pci 0000:00:01.1: PCI bridge to [bus 01]
pci 0000:00:01.1: bridge window [mem 0xf7a00000-0xf7afffff]
pci 0000:02:00.0: [1022:43d5] type 00 class 0x0c0330
pci 0000:02:00.0: reg 0x10: [mem 0xf77a0000-0xf77a7fff 64bit]
pci 0000:02:00.0: enabling Extended Tags
pci 0000:02:00.0: PME# supported from D3hot D3cold
pci 0000:02:00.1: [1022:43c8] type 00 class 0x010601
pci 0000:02:00.1: reg 0x24: [mem 0xf7780000-0xf779ffff]
pci 0000:02:00.1: reg 0x30: [mem 0xf7700000-0xf777ffff pref]
pci 0000:02:00.1: enabling Extended Tags
pci 0000:02:00.1: PME# supported from D3hot D3cold
pci 0000:02:00.2: [1022:43c6] type 01 class 0x060400
pci 0000:02:00.2: enabling Extended Tags
pci 0000:02:00.2: PME# supported from D3hot D3cold
pci 0000:00:01.3: PCI bridge to [bus 02-09]
pci 0000:00:01.3: bridge window [io 0xf000-0xffff]
pci 0000:00:01.3: bridge window [mem 0xf7500000-0xf77fffff]
pci 0000:03:00.0: [1022:43c7] type 01 class 0x060400
pci 0000:03:00.0: enabling Extended Tags
pci 0000:03:00.0: PME# supported from D3hot D3cold
pci 0000:03:01.0: [1022:43c7] type 01 class 0x060400
pci 0000:03:01.0: enabling Extended Tags
pci 0000:03:01.0: PME# supported from D3hot D3cold
pci 0000:03:04.0: [1022:43c7] type 01 class 0x060400
pci 0000:03:04.0: enabling Extended Tags
pci 0000:03:04.0: PME# supported from D3hot D3cold
pci 0000:03:05.0: [1022:43c7] type 01 class 0x060400
pci 0000:03:05.0: enabling Extended Tags
pci 0000:03:05.0: PME# supported from D3hot D3cold
pci 0000:03:06.0: [1022:43c7] type 01 class 0x060400
pci 0000:03:06.0: enabling Extended Tags
pci 0000:03:06.0: PME# supported from D3hot D3cold
pci 0000:03:07.0: [1022:43c7] type 01 class 0x060400
pci 0000:03:07.0: enabling Extended Tags
pci 0000:03:07.0: PME# supported from D3hot D3cold
pci 0000:02:00.2: PCI bridge to [bus 03-09]
pci 0000:02:00.2: bridge window [io 0xf000-0xffff]
pci 0000:02:00.2: bridge window [mem 0xf7500000-0xf76fffff]
pci 0000:03:00.0: PCI bridge to [bus 04]
pci 0000:03:01.0: PCI bridge to [bus 05]
pci 0000:03:04.0: PCI bridge to [bus 06]
pci 0000:03:05.0: PCI bridge to [bus 07]
pci 0000:08:00.0: [8086:24fb] type 00 class 0x028000
pci 0000:08:00.0: reg 0x10: [mem 0xf7600000-0xf7601fff 64bit]
pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:06.0: PCI bridge to [bus 08]
pci 0000:03:06.0: bridge window [mem 0xf7600000-0xf76fffff]
pci 0000:09:00.0: [8086:1539] type 00 class 0x020000
pci 0000:09:00.0: reg 0x10: [mem 0xf7500000-0xf751ffff]
pci 0000:09:00.0: reg 0x18: [io 0xf000-0xf01f]
pci 0000:09:00.0: reg 0x1c: [mem 0xf7520000-0xf7523fff]
pci 0000:09:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:07.0: PCI bridge to [bus 09]
pci 0000:03:07.0: bridge window [io 0xf000-0xffff]
pci 0000:03:07.0: bridge window [mem 0xf7500000-0xf75fffff]
pci 0000:0a:00.0: [10de:1b81] type 00 class 0x030000
pci 0000:0a:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
pci 0000:0a:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:0a:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
pci 0000:0a:00.0: reg 0x24: [io 0xe000-0xe07f]
pci 0000:0a:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
pci 0000:0a:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x16 link at 0000:00:03.1 (capable of 126.016 Gb/s with 8 GT/s x16 link)
pci 0000:0a:00.1: [10de:10f0] type 00 class 0x040300
pci 0000:0a:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff]
pci 0000:00:03.1: PCI bridge to [bus 0a]
pci 0000:00:03.1: bridge window [io 0xe000-0xefff]
pci 0000:00:03.1: bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:00:03.1: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
pci 0000:0b:00.0: [1022:148a] type 00 class 0x130000
pci 0000:0b:00.0: enabling Extended Tags
pci 0000:00:07.1: PCI bridge to [bus 0b]
pci 0000:0c:00.0: [1022:1485] type 00 class 0x130000
pci 0000:0c:00.0: enabling Extended Tags
pci 0000:0c:00.1: [1022:1486] type 00 class 0x108000
pci 0000:0c:00.1: reg 0x18: [mem 0xf7300000-0xf73fffff]
pci 0000:0c:00.1: reg 0x24: [mem 0xf7408000-0xf7409fff]
pci 0000:0c:00.1: enabling Extended Tags
pci 0000:0c:00.3: [1022:149c] type 00 class 0x0c0330
pci 0000:0c:00.3: reg 0x10: [mem 0xf7200000-0xf72fffff 64bit]
pci 0000:0c:00.3: enabling Extended Tags
pci 0000:0c:00.3: PME# supported from D0 D3hot D3cold
pci 0000:0c:00.4: [1022:1487] type 00 class 0x040300
pci 0000:0c:00.4: reg 0x10: [mem 0xf7400000-0xf7407fff]
pci 0000:0c:00.4: enabling Extended Tags
pci 0000:0c:00.4: PME# supported from D0 D3hot D3cold
pci 0000:00:08.1: PCI bridge to [bus 0c]
pci 0000:00:08.1: bridge window [mem 0xf7200000-0xf74fffff]
pci 0000:0d:00.0: [1022:7901] type 00 class 0x010601
pci 0000:0d:00.0: reg 0x24: [mem 0xf7900000-0xf79007ff]
pci 0000:0d:00.0: enabling Extended Tags
pci 0000:0d:00.0: PME# supported from D3hot D3cold
pci 0000:00:08.2: PCI bridge to [bus 0d]
pci 0000:00:08.2: bridge window [mem 0xf7900000-0xf79fffff]
pci 0000:0e:00.0: [1022:7901] type 00 class 0x010601
pci 0000:0e:00.0: reg 0x24: [mem 0xf7800000-0xf78007ff]
pci 0000:0e:00.0: enabling Extended Tags
pci 0000:0e:00.0: PME# supported from D3hot D3cold
pci 0000:00:08.3: PCI bridge to [bus 0e]
pci 0000:00:08.3: bridge window [mem 0xf7800000-0xf78fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
iommu: Default domain type: Translated
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:0a:00.0: vgaarb: setting as boot VGA device
pci 0000:0a:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:0a:00.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
Expanded resource Reserved due to conflict with PCI Bus 0000:00
e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
e820: reserve RAM buffer [mem 0x09d02000-0x0bffffff]
e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff]
e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff]
e820: reserve RAM buffer [mem 0xdb137000-0xdbffffff]
e820: reserve RAM buffer [mem 0xdc7a9000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
e820: reserve RAM buffer [mem 0x41f380000-0x41fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource tsc-early
*** VALIDATE bpf ***
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
*** VALIDATE ramfs ***
*** VALIDATE hugetlbfs ***
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [mem 0xfeb80000-0xfebfffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [mem 0xfd000000-0xfd0fffff] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:04: [io 0x0280-0x028f] has been reserved
system 00:04: [io 0x0290-0x029f] has been reserved
system 00:04: [io 0x02a0-0x02af] has been reserved
system 00:04: [io 0x02b0-0x02bf] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [io 0x04d0-0x04d1] has been reserved
system 00:05: [io 0x040b] has been reserved
system 00:05: [io 0x04d6] has been reserved
system 00:05: [io 0x0c00-0x0c01] has been reserved
system 00:05: [io 0x0c14] has been reserved
system 00:05: [io 0x0c50-0x0c51] has been reserved
system 00:05: [io 0x0c52] has been reserved
system 00:05: [io 0x0c6c] has been reserved
system 00:05: [io 0x0c6f] has been reserved
system 00:05: [io 0x0cd0-0x0cd1] has been reserved
system 00:05: [io 0x0cd2-0x0cd3] has been reserved
system 00:05: [io 0x0cd4-0x0cd5] has been reserved
system 00:05: [io 0x0cd6-0x0cd7] has been reserved
system 00:05: [io 0x0cd8-0x0cdf] has been reserved
system 00:05: [io 0x0800-0x089f] has been reserved
system 00:05: [io 0x0b00-0x0b0f] has been reserved
system 00:05: [io 0x0b20-0x0b3f] has been reserved
system 00:05: [io 0x0900-0x090f] has been reserved
system 00:05: [io 0x0910-0x091f] has been reserved
system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:05: [mem 0xfec01000-0xfec01fff] could not be reserved
system 00:05: [mem 0xfedc0000-0xfedc0fff] has been reserved
system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:05: [mem 0xfed80000-0xfed8ffff] could not be reserved
system 00:05: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:05: [mem 0xff000000-0xffffffff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 6 devices
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
thermal_sys: Registered thermal governor 'power_allocator'
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:01.1: PCI bridge to [bus 01]
pci 0000:00:01.1: bridge window [mem 0xf7a00000-0xf7afffff]
pci 0000:03:00.0: PCI bridge to [bus 04]
pci 0000:03:01.0: PCI bridge to [bus 05]
pci 0000:03:04.0: PCI bridge to [bus 06]
pci 0000:03:05.0: PCI bridge to [bus 07]
pci 0000:03:06.0: PCI bridge to [bus 08]
pci 0000:03:06.0: bridge window [mem 0xf7600000-0xf76fffff]
pci 0000:03:07.0: PCI bridge to [bus 09]
pci 0000:03:07.0: bridge window [io 0xf000-0xffff]
pci 0000:03:07.0: bridge window [mem 0xf7500000-0xf75fffff]
pci 0000:02:00.2: PCI bridge to [bus 03-09]
pci 0000:02:00.2: bridge window [io 0xf000-0xffff]
pci 0000:02:00.2: bridge window [mem 0xf7500000-0xf76fffff]
pci 0000:00:01.3: PCI bridge to [bus 02-09]
pci 0000:00:01.3: bridge window [io 0xf000-0xffff]
pci 0000:00:01.3: bridge window [mem 0xf7500000-0xf77fffff]
pci 0000:00:03.1: PCI bridge to [bus 0a]
pci 0000:00:03.1: bridge window [io 0xe000-0xefff]
pci 0000:00:03.1: bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:00:03.1: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
pci 0000:00:07.1: PCI bridge to [bus 0b]
pci 0000:00:08.1: PCI bridge to [bus 0c]
pci 0000:00:08.1: bridge window [mem 0xf7200000-0xf74fffff]
pci 0000:00:08.2: PCI bridge to [bus 0d]
pci 0000:00:08.2: bridge window [mem 0xf7900000-0xf79fffff]
pci 0000:00:08.3: PCI bridge to [bus 0e]
pci 0000:00:08.3: bridge window [mem 0xf7800000-0xf78fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0xe0000000-0xfec2ffff window]
pci_bus 0000:00: resource 11 [mem 0xfee00000-0xffffffff window]
pci_bus 0000:01: resource 1 [mem 0xf7a00000-0xf7afffff]
pci_bus 0000:02: resource 0 [io 0xf000-0xffff]
pci_bus 0000:02: resource 1 [mem 0xf7500000-0xf77fffff]
pci_bus 0000:03: resource 0 [io 0xf000-0xffff]
pci_bus 0000:03: resource 1 [mem 0xf7500000-0xf76fffff]
pci_bus 0000:08: resource 1 [mem 0xf7600000-0xf76fffff]
pci_bus 0000:09: resource 0 [io 0xf000-0xffff]
pci_bus 0000:09: resource 1 [mem 0xf7500000-0xf75fffff]
pci_bus 0000:0a: resource 0 [io 0xe000-0xefff]
pci_bus 0000:0a: resource 1 [mem 0xf6000000-0xf70fffff]
pci_bus 0000:0a: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
pci_bus 0000:0c: resource 1 [mem 0xf7200000-0xf74fffff]
pci_bus 0000:0d: resource 1 [mem 0xf7900000-0xf79fffff]
pci_bus 0000:0e: resource 1 [mem 0xf7800000-0xf78fffff]
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
NET: Registered protocol family 1
NET: Registered protocol family 44
pci 0000:0a:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:0a:00.1: D0 power state depends on 0000:0a:00.0
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 83604K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0xd7137000-0xdb137000] (64MB)
amd_uncore: AMD NB counters detected
amd_uncore: AMD LLC counters detected
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000003ff)
check: Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=22 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse: init (API version 7.31)
*** VALIDATE fuse ***
*** VALIDATE fuse ***
Platform Keyring initialized
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
io scheduler mq-deadline registered
pcieport 0000:00:01.1: PME: Signaling with IRQ 25
pcieport 0000:00:01.3: PME: Signaling with IRQ 26
pcieport 0000:00:03.1: PME: Signaling with IRQ 27
pcieport 0000:00:07.1: PME: Signaling with IRQ 29
pcieport 0000:00:07.1: AER: enabled with IRQ 29
pcieport 0000:00:08.1: PME: Signaling with IRQ 30
pcieport 0000:00:08.1: AER: enabled with IRQ 30
pcieport 0000:00:08.2: PME: Signaling with IRQ 31
pcieport 0000:00:08.2: AER: enabled with IRQ 31
pcieport 0000:00:08.3: PME: Signaling with IRQ 32
pcieport 0000:00:08.3: AER: enabled with IRQ 32
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
vesafb: mode is 640x480x32, linelength=2560, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xf1000000, mapped to 0x000000006bd7feb9, using 1216k, total 1216k
fbcon: Deferring console take-over
fb0: VESA VGA frame buffer device
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
Monitor-Mwait will be used to enter C-1 state
Linux agpgart interface v0.103
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
VFIO - User Level meta-driver version: 0.3
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:02:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000000000000410
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 5.4.0-7634-generic xhci-hcd
usb usb1: SerialNumber: 0000:02:00.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:02:00.0: Host supports USB 3.1 Enhanced SuperSpeed
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 5.4.0-7634-generic xhci-hcd
usb usb2: SerialNumber: 0000:02:00.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
xhci_hcd 0000:0c:00.3: xHCI Host Controller
xhci_hcd 0000:0c:00.3: new USB bus registered, assigned bus number 3
xhci_hcd 0000:0c:00.3: hcc params 0x0278ffe5 hci version 0x110 quirks 0x0000000000000410
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 5.4.0-7634-generic xhci-hcd
usb usb3: SerialNumber: 0000:0c:00.3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
xhci_hcd 0000:0c:00.3: xHCI Host Controller
xhci_hcd 0000:0c:00.3: new USB bus registered, assigned bus number 4
xhci_hcd 0000:0c:00.3: Host supports USB 3.1 Enhanced SuperSpeed
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 5.4.0-7634-generic xhci-hcd
usb usb4: SerialNumber: 0000:0c:00.3
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: registered as rtc0
rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
platform eisa.0: Probing EISA bus 0
platform eisa.0: EISA: Cannot allocate resource for mainboard
platform eisa.0: Cannot allocate resource for EISA slot 1
platform eisa.0: Cannot allocate resource for EISA slot 2
platform eisa.0: Cannot allocate resource for EISA slot 3
platform eisa.0: Cannot allocate resource for EISA slot 4
platform eisa.0: Cannot allocate resource for EISA slot 5
platform eisa.0: Cannot allocate resource for EISA slot 6
platform eisa.0: Cannot allocate resource for EISA slot 7
platform eisa.0: Cannot allocate resource for EISA slot 8
platform eisa.0: EISA: Detected 0 cards
ledtrig-cpu: registered to indicate activity on CPUs
drop_monitor: Initializing network drop monitor service
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
RAS: Correctable Errors collector initialized.
microcode: CPU0: patch_level=0x08701013
microcode: CPU1: patch_level=0x08701013
microcode: CPU2: patch_level=0x08701013
microcode: CPU3: patch_level=0x08701013
microcode: CPU4: patch_level=0x08701013
microcode: CPU5: patch_level=0x08701013
microcode: CPU6: patch_level=0x08701013
microcode: CPU7: patch_level=0x08701013
microcode: Microcode Update Driver: v2.2.
*** VALIDATE rdt ***
resctrl: L3 allocation detected
resctrl: L3DATA allocation detected
resctrl: L3CODE allocation detected
resctrl: MB allocation detected
resctrl: L3 monitoring detected
IPI shorthand broadcast: enabled
sched_clock: Marking stable (462538204, 265463)->(487541285, -24737618)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: b29621d343e779673d9b82cdbcd5e89612fb785a'
zswap: loaded using pool lzo/zbud
Key type ._fscrypt registered
Key type .fscrypt registered
Key type big_key registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
ima: Allocated hash algorithm: sha1
ima: No architecture policies found
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.apparmor
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
PM: Magic number: 12:156:131
pcie_pme 0000:00:01.1:pcie001: hash matches
acpi PNP0C02:03: hash matches
acpi device:06: hash matches
rtc_cmos 00:03: setting system clock to 2020-07-08T14:06:59 UTC (1594217219)
acpi_cpufreq: overriding BIOS provided _PSD data
Freeing unused decrypted memory: 2040K
Freeing unused kernel image memory: 2712K
Write protecting the kernel read-only data: 22528k
Freeing unused kernel image memory: 2008K
Freeing unused kernel image memory: 1192K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
ahci 0000:02:00.1: version 3.0
ahci 0000:02:00.1: SSS flag set, parallel bus scan disabled
ahci 0000:02:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0x33 impl SATA mode
ahci 0000:02:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst
dca service started, version 1.12.1
nvme nvme0: pci function 0000:01:00.0
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k
igb: Copyright (c) 2007-2014 Intel Corporation.
scsi host0: ahci
cryptd: max_cpu_qlen set to 1000
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
scsi host6: ahci
scsi host7: ahci
ata1: SATA max UDMA/133 abar m131072@0xf7780000 port 0xf7780100 irq 52
ata2: SATA max UDMA/133 abar m131072@0xf7780000 port 0xf7780180 irq 52
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m131072@0xf7780000 port 0xf7780300 irq 52
ata6: SATA max UDMA/133 abar m131072@0xf7780000 port 0xf7780380 irq 52
ata7: DUMMY
ata8: DUMMY
ahci 0000:0d:00.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
ahci 0000:0d:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part
scsi host8: ahci
ata9: SATA max UDMA/133 abar m2048@0xf7900000 port 0xf7900100 irq 61
ahci 0000:0e:00.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
ahci 0000:0e:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part
scsi host9: ahci
ata10: SATA max UDMA/133 abar m2048@0xf7800000 port 0xf7800100 irq 63
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
pps pps0: new PPS source ptp0
igb 0000:09:00.0: added PHC on eth0
igb 0000:09:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:09:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 70:85:c2:b6:2a:cc
igb 0000:09:00.0: eth0: PBA No: FFFFFF-0FF
igb 0000:09:00.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s)
igb 0000:09:00.0 enp9s0: renamed from eth0
nvme nvme0: missing or invalid SUBNQN field.
nvme nvme0: 15/0/0 default/read/poll queues
nvme0n1: p1 p2
usb 1-6: new full-speed USB device number 2 using xhci_hcd
ata1: SATA link down (SStatus 0 SControl 300)
ata9: SATA link down (SStatus 0 SControl 300)
ata10: SATA link down (SStatus 0 SControl 300)
usb 1-6: New USB device found, idVendor=8087, idProduct=0aa7, bcdDevice= 0.01
usb 1-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
ata2: SATA link down (SStatus 0 SControl 300)
usb 1-7: new high-speed USB device number 3 using xhci_hcd
tsc: Refined TSC clocksource calibration: 3792.874 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6d5818a734c, max_idle_ns: 881590694765 ns
clocksource: Switched to clocksource tsc
usb 1-7: New USB device found, idVendor=1a40, idProduct=0201, bcdDevice= 1.00
usb 1-7: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-7: Product: USB 2.0 Hub [MTT]
hub 1-7:1.0: USB hub found
hub 1-7:1.0: 7 ports detected
ata5: SATA link down (SStatus 0 SControl 300)
usb 1-7.1: new full-speed USB device number 4 using xhci_hcd
ata6: SATA link down (SStatus 0 SControl 300)
usb 1-7.1: New USB device found, idVendor=04d9, idProduct=fc02, bcdDevice= 1.32
usb 1-7.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 1-7.1: Product: USB Laser Game Mouse
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: USB Laser Game Mouse as /devices/pci0000:00/0000:00:01.3/0000:02:00.0/usb1/1-7/1-7.1/1-7.1:1.0/0003:04D9:FC02.0001/input/input2
hid-generic 0003:04D9:FC02.0001: input,hidraw0: USB HID v1.10 Mouse [USB Laser Game Mouse] on usb-0000:02:00.0-7.1/input0
input: USB Laser Game Mouse as /devices/pci0000:00/0000:00:01.3/0000:02:00.0/usb1/1-7/1-7.1/1-7.1:1.1/0003:04D9:FC02.0002/input/input3
hid-generic 0003:04D9:FC02.0002: input,hidraw1: USB HID v1.10 Keyboard [USB Laser Game Mouse] on usb-0000:02:00.0-7.1/input1
input: USB Laser Game Mouse Consumer Control as /devices/pci0000:00/0000:00:01.3/0000:02:00.0/usb1/1-7/1-7.1/1-7.1:1.2/0003:04D9:FC02.0003/input/input4
usb 1-7.3: new full-speed USB device number 5 using xhci_hcd
input: USB Laser Game Mouse as /devices/pci0000:00/0000:00:01.3/0000:02:00.0/usb1/1-7/1-7.1/1-7.1:1.2/0003:04D9:FC02.0003/input/input5
hid-generic 0003:04D9:FC02.0003: input,hiddev0,hidraw2: USB HID v1.10 Device [USB Laser Game Mouse] on usb-0000:02:00.0-7.1/input2
system76: loading out-of-tree module taints kernel.
system76: module verification failed: signature and/or required key missing - tainting kernel
system76: Model does not utilize this driver
usbcore: registered new interface driver system76-io
usb 1-7.3: New USB device found, idVendor=258a, idProduct=1006, bcdDevice= 1.07
usb 1-7.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-7.3: Product: Gaming KB
usb 1-7.3: Manufacturer: Gaming KB
input: Gaming KB Gaming KB as /devices/pci0000:00/0000:00:01.3/0000:02:00.0/usb1/1-7/1-7.3/1-7.3:1.0/0003:258A:1006.0004/input/input6
raid6: avx2x4 gen() 41750 MB/s
hid-generic 0003:258A:1006.0004: input,hidraw3: USB HID v1.11 Keyboard [Gaming KB Gaming KB ] on usb-0000:02:00.0-7.3/input0
raid6: avx2x4 xor() 22243 MB/s
input: Gaming KB Gaming KB System Control as /devices/pci0000:00/0000:00:01.3/0000:02:00.0/usb1/1-7/1-7.3/1-7.3:1.1/0003:258A:1006.0005/input/input7
raid6: avx2x2 gen() 39568 MB/s
raid6: avx2x2 xor() 25212 MB/s
input: Gaming KB Gaming KB Consumer Control as /devices/pci0000:00/0000:00:01.3/0000:02:00.0/usb1/1-7/1-7.3/1-7.3:1.1/0003:258A:1006.0005/input/input8
input: Gaming KB Gaming KB Keyboard as /devices/pci0000:00/0000:00:01.3/0000:02:00.0/usb1/1-7/1-7.3/1-7.3:1.1/0003:258A:1006.0005/input/input9
hid-generic 0003:258A:1006.0005: input,hiddev1,hidraw4: USB HID v1.11 Keyboard [Gaming KB Gaming KB ] on usb-0000:02:00.0-7.3/input1
raid6: avx2x1 gen() 21741 MB/s
raid6: avx2x1 xor() 18483 MB/s
usb 1-7.5: new high-speed USB device number 6 using xhci_hcd
raid6: sse2x4 gen() 19948 MB/s
raid6: sse2x4 xor() 11698 MB/s
usb 1-7.5: New USB device found, idVendor=0951, idProduct=1666, bcdDevice= 1.00
usb 1-7.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-7.5: Product: DataTraveler 3.0
usb 1-7.5: Manufacturer: Kingston
usb 1-7.5: SerialNumber: 60A44C4138CCAF3100000FE5
raid6: sse2x2 gen() 19239 MB/s
usb-storage 1-7.5:1.0: USB Mass Storage device detected
scsi host10: usb-storage 1-7.5:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
raid6: sse2x2 xor() 12740 MB/s
raid6: sse2x1 gen() 9189 MB/s
usb 1-7.7: new high-speed USB device number 7 using xhci_hcd
raid6: sse2x1 xor() 9270 MB/s
raid6: using algorithm avx2x4 gen() 41750 MB/s
raid6: .... xor() 22243 MB/s, rmw enabled
raid6: using avx2x2 recovery algorithm
xor: automatically using best checksumming function avx
async_tx: api initialized (async)
usb 1-7.7: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11
usb 1-7.7: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-7.7: Product: USB 2.0 Hub
hub 1-7.7:1.0: USB hub found
hub 1-7.7:1.0: 4 ports detected
EXT4-fs (nvme0n1p1): mounted filesystem with ordered data mode. Opts: (null)
usb 1-7.7.1: new full-speed USB device number 8 using xhci_hcd
usb 1-7.7.1: New USB device found, idVendor=0d8c, idProduct=0014, bcdDevice= 1.00
usb 1-7.7.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-7.7.1: Product: USB Audio Device
usb 1-7.7.1: Manufacturer: C-Media Electronics Inc.
scsi 10:0:0:0: Direct-Access KINGSTON DataTraveler 3.0 1.01 PQ: 0 ANSI: 6
sd 10:0:0:0: Attached scsi generic sg0 type 0
sd 10:0:0:0: [sda] 15187968 512-byte logical blocks: (7.78 GB/7.24 GiB)
sd 10:0:0:0: [sda] Write Protect is off
sd 10:0:0:0: [sda] Mode Sense: 2b 00 10 08
sd 10:0:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA
sda: sda1
sd 10:0:0:0: [sda] Attached SCSI removable disk
input: C-Media Electronics Inc. USB Audio Device as /devices/pci0000:00/0000:00:01.3/0000:02:00.0/usb1/1-7/1-7.7/1-7.7.1/1-7.7.1:1.3/0003:0D8C:0014.0006/input/input10
hid-generic 0003:0D8C:0014.0006: input,hidraw5: USB HID v1.00 Device [C-Media Electronics Inc. USB Audio Device] on usb-0000:02:00.0-7.7.1/input3
usb 1-7.7.3: new full-speed USB device number 9 using xhci_hcd
usb 1-7.7.3: device descriptor read/64, error -32
systemd[1]: Inserted module 'autofs4'
systemd[1]: systemd 245.4-4ubuntu3.1pop0~1590695674~20.04~eaac747 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
systemd[1]: /etc/systemd/system/teamviewerd.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/teamviewerd.pid → /run/teamviewerd.pid; please update the unit file accordingly.
systemd[1]: Created slice system-modprobe.slice.
systemd[1]: Created slice Cryptsetup Units Slice.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Reached target Slices.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Listening on LVM2 poll daemon socket.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Starting Journal Service...
systemd[1]: Starting Availability of block devices...
systemd[1]: Starting Set the console keyboard layout...
systemd[1]: Starting Create list of static device nodes for the current kernel...
systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
systemd[1]: Starting Load Kernel Module drm...
systemd[1]: Started Nameserver information manager.
systemd[1]: Reached target Network (Pre).
systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Kernel Debug File System.
systemd[1]: Mounted Kernel Trace File System.
systemd[1]: Finished Availability of block devices.
systemd[1]: Finished Create list of static device nodes for the current kernel.
systemd[1]: Finished Uncomplicated firewall.
EXT4-fs (nvme0n1p1): re-mounted. Opts: errors=remount-ro
systemd[1]: Finished Remount Root and Kernel File Systems.
systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
systemd[1]: Starting Load/Save Random Seed...
systemd[1]: Starting Create System Users...
systemd[1]: modprobe@drm.service: Succeeded.
systemd[1]: Finished Load Kernel Module drm.
lp: driver loaded but no devices found
systemd[1]: Finished Load/Save Random Seed.
ppdev: user-space parallel port driver
systemd[1]: Finished Load Kernel Modules.
systemd[1]: Finished Create System Users.
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Mounting Kernel Configuration File System...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Mounted FUSE Control File System.
systemd[1]: Mounted Kernel Configuration File System.
systemd[1]: Finished Create Static Device Nodes in /dev.
systemd[1]: Starting udev Kernel Device Manager...
systemd[1]: Finished Apply Kernel Variables.
systemd[1]: Finished Set the console keyboard layout.
systemd[1]: Finished udev Coldplug all Devices.
systemd[1]: Starting Helper to synchronize boot up for ifupdown...
systemd[1]: Starting udev Wait for Complete Device Initialization...
systemd[1]: Finished Helper to synchronize boot up for ifupdown.
systemd[1]: Started udev Kernel Device Manager.
systemd[1]: Starting Show Plymouth Boot Screen...
systemd[1]: plymouth-start.service: Succeeded.
systemd[1]: Started Show Plymouth Boot Screen.
systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch being skipped.
systemd[1]: Started Forward Password Requests to Plymouth Directory Watch.
usb 1-7.7.3: device descriptor read/64, error -32
IPMI message handler: version 39.2
ipmi device interface
ccp 0000:0c:00.1: ccp enabled
systemd[1]: Started Journal Service.
systemd-journald[494]: Received client request to flush runtime journal.
cfg80211: Loading compiled-in X.509 certificates for regulatory database
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
SVM: Virtual VMLOAD VMSAVE supported
SVM: Virtual GIF supported
MCE: In-kernel MCE decoding enabled.
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
usbcore: registered new interface driver btusb
Intel(R) Wireless WiFi driver for Linux
Copyright(c) 2003- 2015 Intel Corporation
iwlwifi 0000:08:00.0: loaded firmware version 29.1654887522.0 op_mode iwlmvm
Bluetooth: hci0: read Intel version: 370810225019140f34
Bluetooth: hci0: Intel device is already patched. patch num: 34
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
nvidia-nvlink: Nvlink Core is being initialized, major device number 236
iwlwifi 0000:08:00.0: Detected Intel(R) Dual Band Wireless AC 3168, REV=0x220
nvidia 0000:0a:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
snd_hda_intel 0000:0a:00.1: Disabling MSI
snd_hda_intel 0000:0a:00.1: Handle vga_switcheroo audio client
iwlwifi 0000:08:00.0: base HW address: 98:3b:8f:d2:9d:99
snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC1220: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC1D0: dig-out=0x1e/0x0
snd_hda_codec_realtek hdaudioC1D0: inputs:
snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC1D0: Line=0x1a
input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:0c:00.4/sound/card1/input11
input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:0c:00.4/sound/card1/input12
input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:0c:00.4/sound/card1/input13
input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:08.1/0000:0c:00.4/sound/card1/input14
input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:08.1/0000:0c:00.4/sound/card1/input15
input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:08.1/0000:0c:00.4/sound/card1/input16
input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:0c:00.4/sound/card1/input17
ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
thermal thermal_zone0: failed to read out thermal zone (-61)
usb 1-7.7.3: new full-speed USB device number 10 using xhci_hcd
iwlwifi 0000:08:00.0 wlp8s0: renamed from wlan0
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 440.100 Fri May 29 08:45:51 UTC 2020
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 440.100 Fri May 29 08:14:04 UTC 2020
[drm] [nvidia-drm] [GPU ID 0x00000a00] Loading driver
Adding 4193784k swap on /dev/mapper/cryptswap. Priority:-2 extents:1 across:4193784k SSFS
usb 1-7.7.3: device descriptor read/64, error -32
resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000c0000-0x000dffff window]
caller os_map_kernel_space.part.0+0x73/0x80 [nvidia] mapping multiple BARs
usb 1-7.7.3: device descriptor read/64, error -32
usb 1-7.7-port3: attempt power cycle
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
audit: type=1400 audit(1594217225.628:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=786 comm="apparmor_parser"
audit: type=1400 audit(1594217225.628:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=786 comm="apparmor_parser"
audit: type=1400 audit(1594217225.628:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=786 comm="apparmor_parser"
audit: type=1400 audit(1594217225.628:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=784 comm="apparmor_parser"
audit: type=1400 audit(1594217225.632:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ippusbxd" pid=790 comm="apparmor_parser"
audit: type=1400 audit(1594217225.632:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=788 comm="apparmor_parser"
audit: type=1400 audit(1594217225.632:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=788 comm="apparmor_parser"
audit: type=1400 audit(1594217225.632:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=789 comm="apparmor_parser"
audit: type=1400 audit(1594217225.632:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=798 comm="apparmor_parser"
audit: type=1400 audit(1594217225.632:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=798 comm="apparmor_parser"
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] No driver support for vblank timestamp query.
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:0a:00.1/sound/card0/input18
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:0a:00.1/sound/card0/input19
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.1/0000:0a:00.1/sound/card0/input20
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.1/0000:0a:00.1/sound/card0/input21
[drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:0a:00.0 on minor 0
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
usb 1-7.7.3: new full-speed USB device number 11 using xhci_hcd
usb 1-7.7.3: Device not responding to setup address.
nvidia-uvm: Loaded the UVM driver, major device number 234.
usb 1-7.7.3: Device not responding to setup address.
snd_hda_codec_hdmi hdaudioC0D0: HDMI: invalid ELD data byte 21
usb 1-7.7.3: device not accepting address 11, error -71
usb 1-7.7.3: new full-speed USB device number 12 using xhci_hcd
usb 1-7.7.3: Device not responding to setup address.
usb 1-7.7.3: Device not responding to setup address.
usb 1-7.7.3: device not accepting address 12, error -71
usb 1-7.7-port3: unable to enumerate USB device
mc: Linux media interface: v0.10
usbcore: registered new interface driver snd-usb-audio
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
NET: Registered protocol family 38
snd_hda_codec_hdmi hdaudioC0D0: HDMI: invalid ELD data byte 45
snd_hda_codec_hdmi hdaudioC0D0: HDMI: invalid ELD data byte 28
igb 0000:09:00.0 enp9s0: igb: enp9s0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX
IPv6: ADDRCONF(NETDEV_CHANGE): enp9s0: link becomes ready
snd_hda_codec_hdmi hdaudioC0D0: HDMI: invalid ELD data byte 18
snd_hda_codec_hdmi hdaudioC0D0: HDMI: invalid ELD data byte 12
rfkill: input handler disabled
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11